scan over tune file

[RonnieW]

I'm not sure what to search for and not sure what to call it except overlay. I got a new computer and now while running the scan log, it will not overlay the tune. I've been doing it on my old computer forever. Now, with the new computer they don't talk. Is there something I need to do to make it happen or what.

[joecar]

In V7.x tunetool do Edit->Properties->Scanner and under Pid Data Links checkmark both items. Click Ok, and restart tunetool.

[RonnieW]

I did this and it give colors across the line and down the column but still links only to the a correct rpm line but always the 15 kpa column. It does not put me in the specific kpa cell that it should be linked to. I am trying to see the specific cell in the VE table that the log should be referring to. This is the same thing it was doing before the change but now has colors across the rpm line and down the 15 kpa column.
**************
okay, I found my problem. It was only the VE table that was not linking correctly. I had to change the KPA in the PID from Imperial to Metric. All is well now.

Thanks
Ronnie

[joecar]

Yes, correct, the scantool pid units must match the tunetool table axis units.