PDA

View Full Version : injector flow rate question


9secVette
May 23rd, 2006, 03:16 AM
Hi guys,
I was wondering if anyone else came across this, I made the switch from using LS1 edit for several years now, to EFI live. (and never looked back!!) When I pull a file with both programs I get the exact opposite results from the same car. For example if a car has a value of 4.80 @ 0 KPA and 4.60 @ 80KPA, if I pull the same car with LS1 edit it will show 4.60 @ 0 KPA and 4.80 @ 80KPA.
I'm assuming EFI live is correct since it simply sooo far advanced, but any info on this would be apprieciated.

Thanks!
superls1
May 23rd, 2006, 09:49 AM
What version of LS1Edit? On some versions of LS1Edit, the IFR table is in Pressure whereas in other versions it is in Vacuum.

http://www.ls1edit.com/pipermail/ls1edit/20031030/009686.html

EFILive is correct. :)
9secVette
May 24th, 2006, 01:04 AM
What version of LS1Edit? On some versions of LS1Edit, the IFR table is in Pressure whereas in other versions it is in Vacuum.

http://www.ls1edit.com/pipermail/ls1edit/20031030/009686.html

EFILive is correct. :)


Thanks,
I checked and both are labeled as KPA, I wonder how many times that drove me crazy without knowing it. I basicly have already decided to always side with EFI if this happens again, although I noticed it during my transition from the two and I do not see myself using the LS1 edit any longer.