PDA

View Full Version : Having acouple issuse


jtaylor111
February 29th, 2016, 06:18 PM
First...I have searched and tried. Have updated the UBS drive. But the V2 will on connect so I can update my firmware. Next I can not get it into dead-poll. Have held the Ctrl button down. When I pull up the EFI Live Control Panel...in the USB tab. It shows the UBS connected but not the V2. In the firmware tab it says the V2 is unresponsive. I bought this unit used. Thanks for any help
Move'n Up
March 1st, 2016, 02:02 AM
Did you try a different USB cable?
jtaylor111
March 1st, 2016, 03:32 AM
I just did....same thing.
Move'n Up
March 1st, 2016, 03:41 AM
What version of Windows are you running and are you connecting to a USB 3 port?
jtaylor111
March 1st, 2016, 04:19 AM
Running windows 7 and yeah I do have it in a USB 3.0
Move'n Up
March 1st, 2016, 04:56 AM
Try a USB 2 port if you have one because the USB 3 ports are problematic for the AutoCal's and V2's. If not look in your computers BIOS for a setting to make the USB ports a version 2 instead of 3 (disabled xHCI interface under the USB configuration).

You can also try loading EFI Live on another older computer to see if the V2 will connect.
joecar
March 1st, 2016, 08:08 PM
More info: Please-Read-Windows-8-Users-%28USB3-xHCI%29 (https://forum.efilive.com/showthread.php?23223-Please-Read-Windows-8-Users-%28USB3-xHCI%29)
COSMOS
March 2nd, 2016, 02:48 AM
My year old Toshiba laptop has 2 USB 3.0 ports and 2 USB 2.0 ports, the tab inside the port on the computer is blue for the 3.0 ports and the 2.0 are black may want to see if you have both and just switch to the 2.0 port...

http://superuser.com/questions/331885/how-to-determine-whether-i-have-usb3-ports-in-my-laptop
jtaylor111
March 2nd, 2016, 01:42 PM
Well I don't know what I did different. I got it in deadpoll and did the EFI Live Recovery (like Ive done a dozen times). Then was able to upgrade the boot block and firmware.
joecar
March 2nd, 2016, 04:23 PM
Why are you needing to put your V2 into dead poll mode so many times...?
jtaylor111
March 2nd, 2016, 06:13 PM
My laptop couldn't see the V2 most of the time. I was trying to update the boot block and firmware. The versions was back in 06 and 07. Even with it in dead poll...it would still tell me to connect it. First thing I did was update the UBS. My first one was stolen and I bought this one used. I never could get it to act right with the computer. It would scan for me.