PDA

View Full Version : Unable to Datalog with Autocal



derek1387
March 10th, 2016, 09:47 PM
Just received my Autocal from my tuner-was able to flash the tune on just fine. But when I try to Record Data, it does not create a log file. It goes to ECM AIRFUEL, then right back to Record Data, or sticks on ECM Airfuel. I then tried to go to View/Select PIDS, and it shows nothing as well.

EFILive Explorer shows no files saved either.

I dont get the timer, or the different PIDs to look at, or anything.

Attached are two videos-both of which i have sent to the tuner, and he is stumped as well.

http://i83.photobucket.com/albums/j286/Derek1387/th_IMG_1315_zpstwibbs7p.mp4 (http://i83.photobucket.com/albums/j286/Derek1387/IMG_1315_zpstwibbs7p.mp4)
http://i83.photobucket.com/albums/j286/Derek1387/th_IMG_1316_zpsioue4u98.mp4 (http://i83.photobucket.com/albums/j286/Derek1387/IMG_1316_zpsioue4u98.mp4)


Any help?

I also wanted to try to datalog/passthrough the Autocal to EFILive Scan and Tune V8, but doesnt look like V8 supports passthrough logging yet with the Autocal. Sad day.

any help would be much appreciated!

joecar
March 11th, 2016, 06:31 PM
Can you datalog/passthru with V7 software...?

Can you post the AC Options.txt file...

what pids are supposed to be logging...?

What year/model/vehicle...?

Move'n Up
March 13th, 2016, 03:14 AM
You're certain that BBX data logging is setup for your vehicle on the AutoCal?

derek1387
March 13th, 2016, 03:16 AM
2015 Camaro V6 LFX. Has the e39a ECM from what I understand.

I'm honestly not 100% sure. Just got the Autocal and trying to figure things out

I will be posting the Options.txt when I get to a computer

I did just re-do the BBX programming to the Autocal per my tuner and will attempt to log tonight when I get to the car

derek1387
March 13th, 2016, 12:35 PM
You're certain that BBX data logging is setup for your vehicle on the AutoCal?

I have reloaded the config files per my tuner. Still same issue

How do I verify if it's setup properly?

joecar
March 13th, 2016, 03:21 PM
Did you get it sorted out...?

derek1387
April 25th, 2016, 08:39 PM
Yessir, sorry for the delay. Apparently my car can be read on E39A, but scanned/flashed on E39. It only had E39A setup.

Up and running just fine now. Now to setup the wideband!