View Full Version : E-38 m.a.f. tunning
smslyguy
March 11th, 2016, 12:06 AM
After looking through countless threads I can't seem to find the M.A.F. tables anywhere, besides b1099. Where would the table be on a e-38 2015 Camaro ss for making m.a.f. adjustments? Is it all automatically adjusted in the v.v.e. tables on these p.c.m.s?
joecar
March 11th, 2016, 06:33 PM
The MAF tables will be one or more of B1097, B1098, B1099 depending on the controller.
Does the 2015 Camaro SS use an E38 or an E92...?
joecar
March 11th, 2016, 06:36 PM
E38/E67/E92 use the dynamic MAF/VE model (MAF during steady state, VE on transients).
VE is a set of polynomial coefficients... VE is edited via VVE surface manipulation (by you).
Don't know what you mean by this part...
After looking through countless threads I can't seem to find the M.A.F. tables anywhere, besides b1099. Where would the table be on a e-38 2015 Camaro ss for making m.a.f. adjustments? Is it all automatically adjusted in the v.v.e. tables on these p.c.m.s?
E38/E67/E92 are ECM's (they only control engine functions).
:)
smslyguy
March 12th, 2016, 10:10 PM
The MAF tables will be one or more of B1097, B1098, B1099 depending on the controller.
Does the 2015 Camaro SS use an E38 or an E92...?
It is a E-38
darcy
March 13th, 2016, 12:07 AM
Table B1099, under Engine Operation>Engine Sensors>MAF Frequency Conversion
If you put 'MAF' in the search bar and keep clicking the Search button, it will go through all of the parameters with MAF in the name and you will find it eventually.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.