View Full Version : 2 bricked pcm's please help
2ktransam
March 24th, 2016, 01:35 PM
I made transmission setting changes to my tune and loaded it and it bricked the PCM. It ran all the way through and said flash completed successfully. When I hit OK my fuel pump went crazy and it wouldn't reconnect. I tried reflashing and full recovery and it just says PCM not detected. I pulled the PCM out of another vehicle and loaded the old calibration in it and everything was good. I then tried to load the calibration with the updated trans setting and it bricked that one too. I can't afford to buy new pcm's and licenses right now so I'm kind of screwed. What the hell is going on?
ScarabEpic22
March 25th, 2016, 04:11 AM
What PCM/ECM and post the tune files please. Once we have that info I'd be happy to spot check the tune and then EFILive can take a look.
wait4me
April 1st, 2016, 01:39 AM
My guess is you are messing with speedometer settings that are to wrong.
joecar
April 1st, 2016, 10:56 AM
What changes did you make...?
2ktransam
April 20th, 2016, 12:21 AM
My guess is you are messing with speedometer settings that are to wrong.
That is possible. I was changing to a 28" tire for the track so I was adjusting tire size and shift points. If that's the case, is it recoverable? I can post up the file later.
wait4me
April 20th, 2016, 12:39 AM
send them to me and I can repair them. The chip needs pulled and redone
2ktransam
April 20th, 2016, 09:59 AM
send them to me and I can repair them. The chip needs pulled and redone
How much to repair both pcm's? I tried to pm you and called.
wait4me
April 20th, 2016, 11:53 AM
you called after the phones where turned off for the night probably. 7pm,
Call during biz hours and I can help you out. Thanks
wait4me
April 21st, 2016, 04:18 AM
Returned your call. Thanks :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.