PDA

View Full Version : Converting a HPT File to EFI Live



Schwanke Engines
April 15th, 2016, 01:07 AM
Hello,

I recently got a basket case GTO in, that has an HPT COS loaded into it or whatever they call it. Wondering if anyone has the capabilities to convert it to an EFI Live Tune file?

I tried to upload the file and it didn't work. so if this is something you can do PM me and Ill just email it to you directly. Thanks in advance.

minytrker
April 15th, 2016, 02:09 AM
I can but its not always a 100% conversion, depends on what custom OS they used. Its also not cheap because I usually have to use 2 HPT license to do it. I can get LS1 pcms cheaper than that so I usually just get another pcm since its the cheaper route.

Schwanke Engines
April 15th, 2016, 09:32 AM
I have a PCM, but want the calibration for a baseline. What would it cost roughly?

Lextech
April 18th, 2016, 03:04 AM
Couldn't you go to the HPT website and download their software, then pay a local shop/person to read it out for you? Then put that cal on your laptop and check it out.

Jeff

minytrker
April 18th, 2016, 06:41 AM
I have a PCM, but want the calibration for a baseline. What would it cost roughly?

$200-$300 depending on year and PCM it is.