Rev limiter

[catman3126]

First where do we set the rev limiter up on a LML? Probly missed something simple but can't seem to get it to go over the stock 3400, also on this one I haven't had this issue before but even with traction control and stab trac disable it won't do a brake stall burnout. Hold the brakes and it won't allow it to fuel up but as soon as I let off the brake it breaks the tires loose and goes to the rev limiter and chops the throttle hard, shifts and then breaks the tires loose again. So where do we adjust the rev limiter?

[NoLimitAutomotiveTuning]

have you played with the torque control/ limiting? with the BTM Disabled it should smoke the tires. as for the rev limiter there are several tables that need to be adjusted to make sure fuel is not cut, I had to dig into the tcm to pull more rpm too. B0472, B2601, B0445, Petal Position tables & Torque to fuel tables.