Volunteers needed for E38/E67 Calc.VET project.

[statesman]

I'm going to be working with joecar to try to produce a Calc.VET for E38/E67 vehicles. Neither of us has an E38/E67 vehicle so we need volunteers to do some tuning changes and make some logs for us.

We're not even sure yet if it can be done, but we are prepared to try... so if you have a suitable vehicle and want to be a part of this project, then let us know.

[Martin_CPRengines]

i just sent joecar a msg about this, i have a 2010 camaro its all back to stock now we can use for this. used to have a 427 with f1r procharger so the only thing i didnt change back to stock is the fuel system.

[joecar]

Hey Martin,

Thanks... this will be good since we would be able to use the chassis dyno.

If it now has a return FPR, did you connect the FPR's reference to intake manifold (i.e. MAP)...?
If so then did you edit the IFR table and the Voltage Offset table...?
(otherwise if the reference sees BARO then those tables can be left stock).

[joecar]

Martin at CPR Engines in Gardena texted me that we'll also use the engine dyno.

[opcode]

I'm in.
2010 Camaro SS
Whipple, LTs, CIA, 3bar,LM1 WB02

[joecar]

ok, thanks.