Commanding close loop under wot with boost

[69camaro5speed]

Looking for ideas why randomly I would get a close loop commands under wot.
It has happen to me 2 times on test drives in different rpms and gears any ideas ?

427 2.9 whipple 23x at 50 cam
It has been driving very well
There also was some tq control in lower gears

[joecar]

( too many pids, this is reducing the sampling rate from 40 Hz to 10 Hz )


That log does not show CL, the HO2Sx1 voltages show no signs of CL;

that log does show commanded LAMBDA going to 1.000... post the tune file that this log was taken from.

[69camaro5speed]

That log does not show CL, the HO2Sx1 voltages show no signs of CL; That is true, really, what I was after is why it went to Lambda after over 8 seconds of wot
IT does it at random times though ,some times it doesn't do it at all