new to EFi Live here

[ipull]

Got my Efi Live here. it tells me my cmd files can't be found gave me a $0502 and a $FFFF

any help would be great to get my truck running again. just got it back from the shop they put on, exhaust, intake,egr/egr cooler delete.

would like to start my truck without hurting anything. they towed it back to my house.

also when I got to read program flash, program full it says wrong ecm type

[catman3126]

what year?

[ipull]

2012 2500 6.7L laramie

i know I have the cmd cm2200a but it will throw all the codes from the deletes i'm sure if i just start the truck.

Do I have to take the ecm off the truck for anything to connect to that?

[catman3126]

Are your trying to download the tune? if so you can't do that you will need delete tunes from a tuner like PPEI or Hardway and use the boot patch tune to unlock then flash in the tune from them.

[ipull]

i'm just trying to get the tune from the Efi live flashscan v2

it has the
stock tune
smokeless
economoy
power
towing

on the tuner already i would kike to just get the economoy and towing on my truck. That way i can at least drive it to work .

i have everything setup so i can read how the truck is running but when i try to put the tune on the truck i keep getting that $FFFF tune switching ,
and i get the $0502 in the tuning and program full it has the cmb_0001 and cmb_0003 and it then gives me that 502 code

[catman3126]

your V2 isn't configured to flash that controller. are you trying to black box flash it with just the V2 or are you trying to flash it with a laptop? sounds like you are trying to flash it with just the V2 alone with tunes on an SD card inserted into the V2?

[cindy@efilive]

FlashScan requires configuration prior to use. Here is the setup document. https://support.efilive.com/kb_article.php?ref=6659-YAHB-3781
Cheers
Cindy


Sent from my iPad using Tapatalk