PDA

View Full Version : Looking for a company to help with base tunes



schwoch1
June 6th, 2016, 01:50 AM
Hi all,

I have been doing minor tuning on and off for years, doing easy things like engine swaps that need codes shut off, small tweaks to fuel/MAF/transmission tables, etc but our shop built an engine that I believe is beyond my abilities to tune unfortunately. We are also planning a few more turbo builds in the near future and need to set up a good repoire with a tuner that can get things done!

Employee at my shop built a twin turbo'd 6 liter using a stock low mileage 6 liter out of a 2006 truck. We made our own harness and set it up to use a 2002 6 liter truck calibration. What it basically boils down too is I don't feel comfortable writing a calibration for this engine. If it were my own engine, I would feel more comfortable as if it were to blow up because of my own stupidity, I am out my money, not someone elses!

I am looking for a company that is pleasant to deal with and can get me a calibration written at a reasonable price so we can get the vehicles up, running and driving well enough that we can get them final tuned at a shop with a chassis dyno . A local company would be a bonus, I am located in SE Wisconsin so Milwaukee and Chicago are relatively local for me!


Any help is appreciated, thanks in advance!!

Mike

joecar
June 6th, 2016, 02:03 AM
See forum member minytrker (https://forum.efilive.com/member.php?977-minytrker) aka http://www.lsxpowertuning.com

dfarr67
October 23rd, 2017, 03:55 AM
Mike, you still kicking around this forum- would like to get some info on your 0411 conversion to 4 cylinder apps.

schwoch1
October 23rd, 2017, 08:56 AM
I am and getting fairly close to embarking on another 411 4 cylinder setup. PM me!!!

dfarr67
October 23rd, 2017, 10:09 AM
I would PM you but that option isn't available to me.

davefarr1967@gmail.com

choking on the price of Holley HP, Emtron or MS3pro- if the 0411 works- then things are looking up. Application is 1990 4runner 22RE with a turbo.

Dave

joecar
October 23rd, 2017, 10:10 AM
You need 10 thread posts under your belt and then pm becomes available.

dfarr67
October 23rd, 2017, 10:14 AM
Like joecar said, I don't hang at EFI Live and this will be post #3. Can you PM me?

schwoch1
October 24th, 2017, 03:32 AM
Respond here one more time than you got it licked!!!

Mike

dfarr67
October 24th, 2017, 03:57 AM
It's hard work bloating post counts without being an ass;)

schwoch1
October 24th, 2017, 04:18 AM
I don't mind, its my thread :)

Mike

joecar
October 24th, 2017, 08:13 AM
lol.

dfarr67
October 26th, 2017, 02:32 AM
Morning Mike- did you receive my PM?