PDA

View Full Version : Used ECM



shay
June 18th, 2016, 03:11 AM
Can I replace used ecm LML E86?
If yes how?
I have access to tis website.
I program with the last cal update according New VIN.
The vtd learn not work.

Thanks

killerbee
June 19th, 2016, 04:25 AM
Can I replace used ecm LML E86?
If yes how?
I have access to tis website.
I program with the last cal update according New VIN.
The vtd learn not work.

Thanks

Clarify your question. It is not clear.

shay
June 21st, 2016, 06:46 PM
Clarify your question. It is not clear.

Is there a possibility to replace ECM with a used one?
Can I also match the VTD with the used one?
Does the EFILive work for the VTD?
I tried to use the TISweb but it didn't work
Thanks
shay

LMMPerrona
June 28th, 2016, 12:51 PM
It will work I just did one. Also mine was E86A (11-14). Dont know about E86B. All i did was lower the time for VATS relearn from 600 sec to 60 sec and relearn count from 3 to 2. I then followed the learn procedure with the new time and counts. It relearned and then i flashed my modified tune. The only reason why I lowered the time is so I dont sit there and drain my battery since it takes forever. Don't know if there is other ways but this way worked for me.