PDA

View Full Version : Help!! Error code 0371 after flash. Now truck will not start!


DODGE-2010
July 19th, 2016, 10:59 AM
Flashed truck and received error code 0371. Will not let me reflash and truck will not start. Wondering if anyone has a idea what to do??
GMPX
July 19th, 2016, 05:08 PM
Not knowing what year or ECM type I can't give you any specific things to try.
But if you try just unhooking the battery for 30 seconds then retry the flash it should go in to recovery mode and get you up and running again.
DODGE-2010
July 19th, 2016, 09:03 PM
Not knowing what year or ECM type I can't give you any specific things to try.
But if you try just unhooking the battery for 30 seconds then retry the flash it should go in to recovery mode and get you up and running again.

It's a 2010 Dodge Ram 2500 6.7l. As far a ecm its stock. I will try the batteries. Any other ideas would be great. Hopefully the ecm is not damaged I did try disconnecting both positive cable on the battery's. But still the same
2007 5.9
July 20th, 2016, 07:00 AM
Did you try the bootloader file first?
DODGE-2010
July 20th, 2016, 07:03 AM
Did you try the bootloader file first?

I don't know much about the software. How would I do that?