E92 calc_pids.txt for doing VE/MAF calculations...

[joecar]

We're trying to do Calc.VET and Calc.MAFT for E92, E83, E78 and E39.


Attached calc_pids.txt defines some calc pids that will help us...

please feel free to download, copy to C:\users\you\EFILive\V7.5\User Configuration and rename to calc_pids.txt.


If you're running analog wideband, please let me know which one.

If you're running 2 widebands, please let me know.

[Ninety8C5]

I've downloaded the PID file and will try to get some logs for you in the next couple of days.

Thanks!

[Ninety8C5]

When I went into the 'Scan' Tool it didn't like the CALC.DAT PID. I changed CALC.DAT.C TO SAE.IAT.C AND CALC.DAT.F TO SAE.IAT.F and then I was able to select the PID. I was just wondering if that is what you wanted in the PID.

Thanks!

Forget the above comment. By selecting the PID even though it's not supported it becomes supported.......:Eyecrazy:

[joecar]

When I went into the 'Scan' Tool it didn't like the CALC.DAT PID. I changed CALC.DAT.C TO SAE.IAT.C AND CALC.DAT.F TO SAE.IAT.F and then I was able to select the PID. I was just wondering if that is what you wanted in the PID.

Thanks!

Forget the above comment. By selecting the PID even though it's not supported it becomes supported.......:Eyecrazy:Are you saying that the original form works ok...?

[joecar]

CALC.DAT.K should work with either CALC.DAT.C or SAE.IAT.C...

by using CALC.DAT.C I'm avoiding mentioning SAE.IAT.C more than once (for programming reasons).

[Ninety8C5]

Yes. It wasn't supported (X through PID) because the CALC.DAT PID wasn't selected. So when you select it, it's supported (no X).

[Ninety8C5]

Here's a log I just took.

[joecar]

Log looks very good... please also log ETCTP when you get a chance (no rush... I'm going to be busy analyzing your current log).