PDA

View Full Version : LML RPM limit


catman3126
October 31st, 2016, 02:47 AM
I've pretty much tried everything I can think of on my 2015 E86b LML to get the rpm limit raised with no success. trans tuned t87 to 3400 rpm shift points and it won't go there. What rpm limit are you all getting out of them? also still have the issue where I can go over 120 mph, let off and have to drop back below 80 or so to have any power. like if I get back into the throttle after going over a 100 it has very little until it drops below 80 mph. any ideas?
NoLimitAutomotiveTuning
November 8th, 2016, 08:43 AM
I have several LML trucks Driving around with RPM from 3400 all the way to 4500. There are lots of tables that need to be modified to allow raised rev limiters. but it can be done
SASDakota
November 9th, 2016, 07:59 AM
How clean is it up around 3400-4000rpms? Are you watching soot load on those pulls?
NoLimitAutomotiveTuning
November 9th, 2016, 11:22 AM
All the trucks I have pulling that kind of RPM are fully Deleted, but I have found when pulling the rpm up it does clean up the smoke and pulls very hard.
catman3126
November 9th, 2016, 12:35 PM
I'll keep at it gotta figure it out.
NoLimitAutomotiveTuning
November 15th, 2016, 10:55 AM
If you need help just let me know an I can do my best to help you.
catman3126
November 15th, 2016, 11:02 AM
On some of the tables the cells stop at 3600 or so. I want to say the pulse table does. I'll have to look tonight.
doeboy62
October 6th, 2019, 10:32 AM
If you need help just let me know an I can do my best to help you.

Can I also get some help on this? Really struggling.