PDA

View Full Version : Look for a stock tune for Silverado 2500 2010-2015 6.0L w/ flex



opcode
November 23rd, 2016, 07:55 AM
I picked up a set of 12613412 injectors and would like to take a look at the stock tune.
I didnt see one in the depot.

Thanks

Fits Following Make / Model :

Express Van : 2010-2015, 6.0L
Silverado 2500 Pickup : 2010-2015, 6.0L
Silverado 3500 Pickup : 2010-2015, 6.0L
Savanna Van : 2010-2015, 6.0L
Sierra 2500 Pickup : 2010-2015, 6.0L
Sierra 3500 Pickup : 2010-2015, 6.0L
Suburban : 2010-2014, 6.0L
Yukon Denali : 2010-2014, 6.0L
Yukon XL Denali : 2010-2014, 6.0L

Whipped383
November 23rd, 2016, 03:42 PM
Looking for the same but I need gen3 tune data for them. By chance do you know the engine code?

opcode
November 25th, 2016, 10:27 AM
Looking for the same but I need gen3 tune data for them. By chance do you know the engine code?

I *think* L96

http://surefireengines.com/cgi-bin/infop?DCT13

joecar
November 25th, 2016, 01:44 PM
If it's L96 then see this post by Wipped383 in another thread: Correct-IFR-tables-for-LS3-LS7-injectors-in-Gen-III~post#132 (https://forum.efilive.com/showthread.php?11498-Correct-IFR-tables-for-LS3-LS7-injectors-in-Gen-III&p=234526&viewfull=1#post234526)

opcode
November 26th, 2016, 06:51 AM
If it's L96 then see this post by Wipped383 in another thread: Correct-IFR-tables-for-LS3-LS7-injectors-in-Gen-III~post#132 (https://forum.efilive.com/showthread.php?11498-Correct-IFR-tables-for-LS3-LS7-injectors-in-Gen-III&p=234526&viewfull=1#post234526)

Thanks @joecar!
One last question. since the IFR is done via delta kpa. If the injectors are rated at 3bar but will be running at 4bar, do I need to scale the table by 1.1614 [sqrt(58/43)] or will the delta cover this?

joecar
November 26th, 2016, 06:47 PM
You will still need to scale the injectors... scale by sqrt(58.0/43.5) = 1.1547 (since 3 bar is 43.5 psi).



Delta kPa refers to the pressure difference between top of injector (at rail pressure) and bottom of injector (at manifold pressure)...

if FPR is 4-bar (58 psi, 400 kPa) the absolute rail pressure is 500 kPa;

MAP (manifold absolute pressure) ranges from 30 kPa (closed throttle decel) to 100 kPa (WOT);

so delta kPa ranges from 400 kPa (WOT) to 470 kPa (closed throttle decel).