PDA

View Full Version : Checksum $06FF



autronika
December 3rd, 2016, 01:40 AM
Hi,

I tried to flash a modified tune into a Camaro 6.2 engine. At the end of the flash got a "Script Exited with Code $06FF-Checksum Failure". (The car was already modified by another tuner)
Also try to record the original, But not crank or run.

How can I solve the problem?

wesam
December 3rd, 2016, 04:43 PM
Try flashing using V7.5

I had this problem many times for cars tuned before with Diablo which cause some issues and it should be flashed using V7.5

GMPX
December 4th, 2016, 09:11 AM
Use this file instead, wesam's description of the problem is correct.

autronika
December 4th, 2016, 01:13 PM
Use this file instead, wesam's description of the problem is correct.

Thanks for the quick reply for file-fix!! I now update my Flashcan and reflash the car !!!

Thanks again.

GMPX
December 4th, 2016, 02:37 PM
Oh sorry, I forgot I was running a very new installation, you can get it from here.
https://forum.efilive.com/showthread.php?27185-November-2016-EFILive-Beta-Test-Release

autronika
December 5th, 2016, 10:05 AM
Fantastic!!! The car running OK


Thank you very much for the support!!!!

autronika
May 15th, 2017, 06:20 AM
Hi,

I have another Camaro with same problem, can you fix this please ???

Thanks !!

GMPX
May 15th, 2017, 10:51 AM
:thumb_yello:

autronika
May 16th, 2017, 12:11 AM
:thumb_yello:

Ohh!! Very very thanks for your support !!!

layjzay
May 24th, 2019, 07:06 AM
I have an E92 with same issue 15 z06 manual op 12666661

GMPX
May 25th, 2019, 11:56 AM
This should work now.

layjzay
May 27th, 2019, 01:45 AM
Thank you!

it's all fixed..