PDA

View Full Version : Service Traction Control/Stabilitrac



comnrailpwr
December 11th, 2016, 12:31 PM
i have tuned my fair share of LML and i got one with a problem that i believe to be File compatability issue. This truck plays happy off road tuned but i got a service traction control and stabilitrac message. i have tried several files and i do not have the correct base files to creat one with my own segments. i have tried different combos. i have done probably 25 LML and this is the only one with this issue i have had wither either efilive or competitor products.. customer says the message was not there prior but i have no proof as i didnt check. possible the flash messed up the ECM? i have not tranny tuned this truck so the tcm chould be good. the traction control and stabilitrac does not work on the truck currently with the messages. other than that everything went well. truck is a 2012LT 4dr 4x4.
Anyone else have this issue?
Anyone have a correct base file so i can rule out tuning being the issue?

1GC1KVC84CF204279

Operating System 12649244
Engine Operation 12655913 - 12651040 - 12649731
Engine Diagnostic 12655917 - 12651044 - 12649735 - 12651046 - 12649737
Engine 12655908 - 12649721

Fuel System 12649742
System 12655936 - 12649759
Speedometer 12649776
Boot Block 12649331

30 RUM
December 11th, 2016, 01:42 PM
Are you using the correct speedo segment? If not that is most likely your problem.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

comnrailpwr
December 11th, 2016, 02:14 PM
i figured it was either that or engine operation. i was able to build a file that had them all except Engine Operation and Speedometer

comnrailpwr
December 11th, 2016, 03:09 PM
attached is my base file missing the correct speedo and engine opp segments

comnrailpwr
December 11th, 2016, 11:56 PM
Thanks to 30 Rum I got the correct speedo segment. Only one I can't track down is the Engine operation segment. Anyone else help with this? Would like to have correct base for when he drives here this evening. If engine opp can't be responsible for my issues then I'm not worried, truck runs great code free.

rcr1978
December 12th, 2016, 02:02 AM
I looked through mine and all I have is 911,914 for that one. Try Tony if yo wan't it to match he only charges $50 now.

comnrailpwr
December 12th, 2016, 02:20 AM
Thanks for checking. I am willing to buy one if this segment in fact can cause my issue. Hoping someone had this one lone segment. Hate to eat the $50 and this segment have nothing to do with my issue.

SASDakota
December 12th, 2016, 03:44 AM
I would almost suggest just buying it to ensure the best outcome. Its better to be over-prepared and not need it in my opinion.

Caveat to my comment. I have never tuned an LML but my FIL is talking about upgrading from his LMM so I have started poking around the LML stuff.

comnrailpwr
December 12th, 2016, 06:39 AM
I agree. Does anyone have an email for Tony?

Sent from my XT1585 using Tapatalk

Mitco39
December 12th, 2016, 08:44 AM
sales@ridgerunnerdieselperformance.com

He will get it to you asap im sure.

comnrailpwr
December 12th, 2016, 01:40 PM
I was able to get it done. Not exactly sure how yet as I flashed it so many times. A lot had to do with transfer case being manual and switches in the LAN not being disabled. Thanks to those that helped.

LMMPerrona
December 21st, 2016, 06:27 PM
I was able to get it done. Not exactly sure how yet as I flashed it so many times. A lot had to do with transfer case being manual and switches in the LAN not being disabled. Thanks to those that helped.


Glad it fixed the issue. Like I was telling you, I fought that same problem once. I noticed that when you dont have the file for a 4x4 Manual shift, just disable the transfer case switches in LAN and it fixed my problem.