PDA

View Full Version : IAT CAX File for 12587603 and 12212156



Highlander
December 20th, 2016, 08:25 AM
This will help out a few people:
12587603 / 040730005




[B9996]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = IAT Sensor Calibration Table
DESC.002 =
DESC.003 =
DESC.004 =
DESC.005 =
;
;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- ------------------------------------ --------------------------- ---------------- --- --- -- ---
VIEW = 2 "IAT Sensor Calibration Table" "IAT" "" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = F90A 0 16 SNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; ---------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = "C" 0.0390625 0 3 -40 284 -40 284
IM_SLOT = "F" 0.0703125 0 3 -40 543 -40 543

;
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- ----------------------------------------------------------
SI_COL = "C" "C"
IM_COL = "F" "F"
;
SI_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00"
IM_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00".
; ================================================== =============================




12212156 02020005



[B9996]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = IAT Sensor Calibration Table
DESC.002 =
DESC.003 =
DESC.004 =
DESC.005 =
;
;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- ------------------------------------ --------------------------- ---------------- --- --- -- ---
VIEW = 2 "IAT Sensor Calibration Table" "IAT" "" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = E3BC 0 16 SNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; ---------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = "C" 0.0390625 0 3 -40 284 -40 284
IM_SLOT = "F" 0.0703125 0 3 -40 543 -40 543

;
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- ----------------------------------------------------------
SI_COL = "C" "C"
IM_COL = "F" "F"
;
SI_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00"
IM_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00".
; ================================================== =============================

joecar
December 20th, 2016, 09:18 AM
Hi Highlander,

Thanks for posting.

What does % A/D refer to (the axis looks a lot like TP%)...?

wesam
December 20th, 2016, 04:28 PM
Hi Highlander
For Which ECM is this ? I think E67 ?

wesam
December 20th, 2016, 04:30 PM
Umm it seems to be for LS1B

GMPX
December 20th, 2016, 05:52 PM
Hi Highlander
For Which ECM is this ? I think E67 ?
EFILive has both IAT scalers in the software already for the E67.

joecar
December 21st, 2016, 10:15 AM
Umm it seems to be for LS1BYes, those are both LS1B OS's.

Tre-Cool
December 21st, 2016, 01:25 PM
Is there a similar table/cax for the TPS?

I.e can you modify the voltage scale to TPS position, would be handy in some conversions that use different tps or limited throttle blade movement.

as an example, a friends burnout car uses a ford tps on a big and ugly hat and based on the position he only gets to 65% at wot. it would be good to re-calibrate the range for his to indicate 100%. I'm using 01290005

joecar
December 21st, 2016, 03:14 PM
Hi Highlander,

Thanks for posting.

What does % A/D refer to (the axis looks a lot like TP%)...?
Instead of %AD (taking it as meaning percentage of analog voltage range), do you want to make this axis the actual voltage range...?

The vehicles using LS1B used 0-5V range for the IAT.

Highlander
January 24th, 2017, 08:06 AM
There is for TPS scaling...
A/C scaling too and a few others.

jdavies
February 3rd, 2017, 07:10 AM
Instead of %AD (taking it as meaning percentage of analog voltage range), do you want to make this axis the actual voltage range...?

The vehicles using LS1B used 0-5V range for the IAT.

Any updates on this? I want to use a card style maf but am unsure since I don't know what the units are.

Highlander
February 3rd, 2017, 07:12 AM
This is the sensor calibration I use

140.000000
104.062500
76.250000
60.000000
48.984375
39.921875
32.148438
25.312500
18.710938
13.203125
7.656250
1.210938
-6.601563
-14.375000
-24.179688
-37.812500
-40.000000

jdavies
February 3rd, 2017, 07:15 AM
Thanks Highlander. I will give those a try.

LastCall
February 3rd, 2017, 12:21 PM
Thanks for sharing this Highlander.

What program do you use to make this an actual CAX file? Can I use a text editor and then replace the coding with yours and then change the extension to CAX when done? Seems too easy that way, but thought I would ask. Can you have multiple tables added in one CAX (B9996 and B9021 for example)?

Highlander
February 3rd, 2017, 12:33 PM
Regular notepad

i use notepad++

LastCall
February 3rd, 2017, 01:01 PM
Great, thanks! And combining coding into one cax file shouldn't be an issue?

Highlander
February 3rd, 2017, 02:21 PM
No. Each parameter/table/function is separate. As long as its compatible with the os, you will be fine. My cax for this os is 600kb big. And the one for 12587603 is 12mb!

aaronc7
February 14th, 2020, 05:27 AM
My small contribution. I used this and made it work for 12593358 / 02040003. In prep to convert to LS3 card MAF.



[B9996]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = IAT Sensor Calibration Table
DESC.002 =
DESC.003 =
DESC.004 =
DESC.005 =
;
;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- ------------------------------------ --------------------------- ---------------- --- --- -- ---
VIEW = 2 "IAT Sensor Calibration Table" "IAT" "" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = E3BE 0 16 SNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; ---------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = "C" 0.0390625 0 3 -100 284 -100 284
IM_SLOT = "F" 0.0703125 32 3 -148 543 -148 543

;
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- ----------------------------------------------------------
SI_COL = "C" "C"
IM_COL = "F" "F"
;
SI_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00"
IM_ROW = "% A/D" "0.00,6.25,12.50,18.75,25.00,31.25,37.50,43.75,50.0 0,56.25,62.50,68.75,75.00,81.25,87.50,93.75,100.00".
; ================================================== =============================

aaronc7
February 22nd, 2020, 09:36 AM
I switched over to LS3 MAF today and found a small issue with this if you use Farenheit. Need to change the "offset" to "32".

joecar
February 24th, 2020, 02:29 PM
Thanks aaronc7.