PDA

View Full Version : PID help



tune time
January 29th, 2017, 08:38 AM
Still new to EFilive, Can anyone please tell me where to find a step by step on how to set up my ECM afm1000. And how to write a pid for Lamda err for MAF tuning. And lamda err for vve tuning. This system is way different from HP. Any help would be greatly appreciated. The ECM I am working with is a E38 2010 vett. OS is 12635863.

LastCall
January 29th, 2017, 01:48 PM
There are many preconfigured PIDs built into EFILive ScanTool V7. These PIDs are located in the WB02 portion of the PID drop down menu. If one is not available there, I would take a look at the AutoVe tutorial. It has info on how to create custom PIDs (serial and analog). See link below:

http://download.efilive.com/Tutorials/PDF/AutoVE%20Tuning%20Tutorial.pdf

joecar
January 29th, 2017, 03:23 PM
Are you tuning VVE for which ECM...?

~Moderator~

tune time
January 30th, 2017, 01:28 AM
Trying to tune MAF and VVE on E38 2010 Vett, OS# 12635863

tune time
January 30th, 2017, 04:25 AM
ECM AFM 1000 settings are 0 volts=8.0 afr and 5 volts=18 afr. AFR=2 x volts. Any help on how to write a custom pid for this would be great I am not good at writing code. thank you in advance.

joecar
January 30th, 2017, 04:14 PM
Ok, the linear equation for this is: afr = v*2 + 8

I'll write you an analog calc pid for that later tonite when I get home

( you said in your other thread that it does not appear to have a serial comms ouput )

~Moderator~

joecar
January 31st, 2017, 07:54 AM
Which AFM1000 version do you have: STD, B , C, D...?

Or, I need to know what stoichiometric AFR your AFM1000 assumes...?

Edit: I remember that ECM uses 14.57 on their AFM1500, so I will use the same.

joecar
January 31st, 2017, 08:04 AM
Copy the attached file calc_pids.txt to folder C:\user\<you>\documents\EFILive\V7.5\User Configuration.


Also copy the *.pid file to C:\user\<you>\documents\EFILive\V7.5\PIDs



Please do this: send me a log of those pids (I want to look at SAE.LAMBDA).


Thanks.


edit: see correction above (sorry, my bad, I was typing too quickly).

tune time
January 31st, 2017, 09:27 AM
Copy the attached file calc_pids.txt to folder C:\user\<you>\documents\EFILive\V7.5\Configuration.


Also copy the *.pid file to C:\user\<you>\documents\EFILive\V7.5\PIDs



Please do this: send me a log of those pids (I want to look at SAE.LAMBDA).


Thanks.

Thank you for helping. the AFM 1000 is as follows

0.0 volts=8.0 afr =.55 lambda
5.0 volts=18.0 afr =1.24 lambda
14.56 is lambda 1
math is lambda1 is volts x 2+8

joecar
January 31st, 2017, 09:38 AM
You are welcome.


Please see correction to post #8 above ( folder is User Configuration ).

joecar
January 31st, 2017, 09:41 AM
Thank you for helping. the AFM 1000 is as follows

0.0 volts=8.0 afr =.55 lambda
5.0 volts=18.0 afr =1.24 lambda
14.56 is lambda 1
math is lambda1 is volts x 2+8The calc_pids.txt file posted above is based on these values.

( 14.56 and 14.57 are different by less than 0.07% i.e. they are the same )