PSS
March 9th, 2017, 05:24 PM
We have in stock 8 port terminal blocks for the EFILive FlashScan V2 interface module.
http://shop.proservsolutions.com/products/8-port-terminal-block-input-connector-for-efilive-flashscan-v2-scan-tune-module (http://shop.proservsolutions.com/products/8-port-terminal-block-input-connector-for-efilive-flashscan-v2-scan-tune-module)
20840
These allow you to connect analog inputs, thermocouple temperature sensors and other devices to the EFILive FlashScan V2 interface cable.
Even if you only need to use a few connections, it is much safer to use the 8 port terminal block that can only be installed in the V2 module one way than to use the 2 port terminal blocks that can be installed in between positions causing potential wiring errors that can result in damage to the FlashScan interface.
Specifications:
8 port terminal block
Designed for 14 to 28 AWG wires
http://shop.proservsolutions.com/products/8-port-terminal-block-input-connector-for-efilive-flashscan-v2-scan-tune-module (http://shop.proservsolutions.com/products/8-port-terminal-block-input-connector-for-efilive-flashscan-v2-scan-tune-module)
20840
These allow you to connect analog inputs, thermocouple temperature sensors and other devices to the EFILive FlashScan V2 interface cable.
Even if you only need to use a few connections, it is much safer to use the 8 port terminal block that can only be installed in the V2 module one way than to use the 2 port terminal blocks that can be installed in between positions causing potential wiring errors that can result in damage to the FlashScan interface.
Specifications:
8 port terminal block
Designed for 14 to 28 AWG wires