PDA

View Full Version : E80 L4 SIDI how is boost increased what tables to change? 2016 camaro 2.0 turbo.



david imgrund
March 10th, 2017, 01:50 AM
I see it has P-I-D controller, are those graphs modified or other boost tables? Injector tables need tweeking after this? Thanks

joecar
March 10th, 2017, 05:52 AM
May I have a look at your tune file.

david imgrund
March 10th, 2017, 06:44 AM
guess I do not know how to move it here, guess I do not know how to move here I tried copy and paste and drag both

joecar
March 10th, 2017, 08:09 AM
At the bottom of this webpage, click Go Advanced, scroll down, click Manage Attachments...

then in the Manage Attachments window that pops up, click Add Files, click Select Files, in the Open dialog that pops up browse to your tune file, click Ok;

then in the Manage Attachments window click Done;

complete your post (type at least 3 characters, click Submit Reply).

david imgrund
March 10th, 2017, 03:13 PM
jkhhg

joecar
March 10th, 2017, 09:57 PM
Thanks

( did I mean 5 chars? )

~Moderator~

david imgrund
March 11th, 2017, 02:41 AM
Thanks

( did I mean 5 chars? )

~Moderator~

Did you get file?

joecar
March 11th, 2017, 07:26 AM
Yes, I see it, I'll view it when I get home, thanks.

~Moderator~

joecar
March 11th, 2017, 07:27 AM
So you increased boost, but engine is otherwise stock...?

~Moderator~

david imgrund
March 11th, 2017, 12:22 PM
So you increased boost, but engine is otherwise stock...?

~Moderator~

no this is stock file I want to increase boost. I am adding charge pipes and downpipe cat delete and CAI and E85 flex sensor. I have a file I tried to increase boost with torque charts added 15% and added 8%timing but don't know if boost went up im installing boost gage sunday running stock tune putting in mine seeing if boost goes up. Its all stock now im waiting on charge pipes. im confused how to increase the boost on this.

joecar
March 11th, 2017, 11:47 PM
I didn't get a chance to look at your file, I'll look in the morning (it's 4:45 am and I haven't been to bed yet).

~Moderator~

joecar
March 12th, 2017, 12:11 PM
You have VVE tables that support 2-bar and 3-bar... you would replace your MAP sensor with 2-bar/3-bar sensor, then you would edit/tune the corresponding VVE table (disable MAF during this).