Trouble doing a case learn P0315 2007 E67 CTS-v in 04 colorado

[04colyZQ8]

Only one code left now, yeah I could turn it off, but I find they idle smoother and knock less when the case learn is completed. P0315 is set, I know you will all say not possible in a non factory vehicle...but I had a E40 LS2, in this same truck, and always could do a case learn with HPT or EFI live. Because the Colorado bcm still sent the parking brake signal to the pcm.

Now all I did was swap motors to a GEN IV 58x, and 07 E67 PCM (07 CTS-v OS) everything else speedo, etc.. cruise light function through the bcm, to this new PCM, you'd think I could do a case learn?

Using EFi I get DVT fault parking break set T-56 in neutral, brake depressed

using Hp tuners it attempts but I don't feel a fuel cut off? I revved to 6800rpm?? So I lowered the rev limiter to 4000 in neutral now it revs to 4600, softly, no hard fuel cut? Were is the case learn fuel cut rpm limiter, can I lower this to something that wont blow the motor?? like 5000 and under? I think that's the issue with hpt? its just not hitting fuel cut off?

Why does EFI say DVt fault? Do I need to maybe insert certain PIDs for this to work?

Worse case I turn off the DTC, anyway to smooth out idle, vibrations, and to tone down false knock, from not having the case learn completed?

[joecar]

When you see DVT Fault in the scantool, can you goto the Console (F6) tab and copy/paste that text to here (do Ctrl-A to select all of it).

[04colyZQ8]

21:13:46.377: EFILive V7.5 Version V7.5.9 (Build 318)
21:13:57.361: Ready.

21:14:32.438: Scanning for EFILive FlashScan V2 HAPI
21:14:32.448: Autodetect interface ...
21:14:32.638: Interface firmware version: 2.7.109
21:14:32.638: Connection to [FSV2] interface is OK
21:14:32.658: CAN-VPW Bridge Activated
21:14:32.728: Current protocol set to: "ISO 15765 CAN"
21:14:32.738: Autodetect ECM...
21:14:32.758: Connection to ECM is OK
21:14:32.778: Current protocol: "ISO 15765 CAN"
21:14:32.898: USB driver version: 2.8.40
21:14:32.898: USB library version: 3.2.7
21:14:32.918: Interface firmware model: FSV2
21:14:32.938: Interface firmware version: 2.7.109
21:14:32.958: Interface firmware date: Dec 29, 2016
21:14:32.978: FlashScan serial number: 005000118167
21:14:32.998: FlashScan license number: 005000118167
21:14:33.008: FlashScan alternate license number: 005000118167
21:14:33.178: Request VIN...
21:14:33.278: VIN: 1G6DN57U070115980
21:14:33.378: Request operating system...
21:14:33.398: Operating system: 12609051
21:14:37.069: Loading generic configuration file: sae_generic.txt
21:14:37.071: User defined calculated PIDs file: calc_pids.txt
21:14:37.073: Enhanced configuration file: gm_enhanced.prn
21:14:41.438: Request VIN...
21:14:41.738: VIN: 1G6DN57U070115980
21:14:41.848: Request operating system...
21:14:41.868: Operating system: 12609051
21:14:41.938: Validating PIDs...
21:14:42.652: Validating Modules...
21:14:42.752: Initialising PIDs...
21:14:42.762: Initialising Modules...
21:14:43.192: Ready.

21:16:20.320: Autodetect interface ...
21:16:20.480: Interface firmware version: 2.7.109
21:16:20.490: Connection to [FSV2] interface is OK
21:16:20.520: Autodetect ECM...
21:16:20.550: Connection to ECM is OK
21:16:26.032: Disconnecting ...
21:16:26.582: CAN-VPW Bridge Deactivated
21:16:26.582: Disconnected
20:44:37.686: Scanning for EFILive FlashScan V2 HAPI
20:44:37.786: Autodetect interface ...
20:44:38.186: Interface firmware version: 2.7.109
20:44:38.186: Connection to [FSV2] interface is OK
20:44:38.206: CAN-VPW Bridge Activated
20:44:38.286: Current protocol set to: "ISO 15765 CAN"
20:44:38.286: Autodetect ECM...
20:44:38.386: Connection to ECM is OK
20:44:38.416: Current protocol: "ISO 15765 CAN"
20:44:38.806: USB driver version: 2.8.40
20:44:38.806: USB library version: 3.2.7
20:44:38.826: Interface firmware model: FSV2
20:44:38.846: Interface firmware version: 2.7.109
20:44:38.866: Interface firmware date: Dec 29, 2016
20:44:38.886: FlashScan serial number: 005000118167
20:44:38.906: FlashScan license number: 005000118167
20:44:38.926: FlashScan alternate license number: 005000118167
20:44:39.086: Request VIN...
20:44:39.186: VIN: 1G6DN57U070115980
20:44:39.286: Request operating system...
20:44:39.316: Operating system: 12609051
20:44:53.953: Loading generic configuration file: sae_generic.txt
20:44:53.953: User defined calculated PIDs file: calc_pids.txt
20:44:53.953: Enhanced configuration file: gm_enhanced.prn
20:44:58.786: Request VIN...
20:44:59.096: VIN: 1G6DN57U070115980
20:44:59.426: Request operating system...
20:44:59.446: Operating system: 12609051
20:44:59.626: Validating PIDs...
20:45:00.376: Validating Modules...
20:45:00.506: Initialising PIDs...
20:45:00.586: Initialising Modules...
20:45:00.596: Ready.

[04colyZQ8]

When you see DVT Fault in the scantool, can you goto the Console (F6) tab and copy/paste that text to here (do Ctrl-A to select all of it).

Is this what you wanted see above?

[Blacky]

After you get the DVT error, select File->Generate error report. Save the report and email it to me at paul@efilive.com
Include a link to this thread so I know what it's about.

Regards
Paul

[04colyZQ8]

Ok will do:)