timing at wot while stopped

[TrendSetter]

I am trying to spool my turbos while foot braking and it seems like the pcm is pulling timing on its own. i have the base spark in gear and high octane table set at about 30 degrees where it needs to be, 2000 rpm and .52-.60 g/cyl and if i ease into the throttle the timing stays high but as soon as i exceed about 30% tps timing starts ramping down to about 12 degrees.
i have looked all through the tune and cant find anything that would cause this.
os is COS5 02020005

i have set abuse management upper rpm to 5000 and speed threshold to 1.
i disabled axle torque limiting and set max allowed engine torque to 867

does anyone know how to force more timing in this situation?

[ProperTuningOG]

Put up a copy of the tune, it could be many thing....

[TrendSetter]

20902
20903
20904

here is the tune file with a couple short logs

[ProperTuningOG]

Take a look. I did not work this, just turned off everything I would for a rig like this.

20905

[TrendSetter]

Ill try it as soon as i get off work today.
thank you!

[joecar]

I think it's table B0401.

[TrendSetter]

i used the tune posted and it worked.
thanks!

[TrendSetter]

I think it's table B0401.

That was one of the tables that was changed to make it work, so it very well could have been my problem.

[ProperTuningOG]

Now work on your fuel and timing.... A BUNCH :cucumber: