View Full Version : Injector Offset Help
Jstewy21
April 8th, 2017, 10:10 AM
I have a set of Fast 46# injectors I installed last night. I am currently trying to adjust the tune for the new injectors and have an issue with the Offset table. I was given the following information from FAST.
Ms V
1.70 8
1.29 9
1.00 10
0.78 11
0.63 12
0.50 13
0.41 14
0.19 16
How can I create a table with the given info across the KPA scale? Thanks for any help.
joecar
April 8th, 2017, 10:32 AM
Is your FPR MAP-referenced or not...?
~ by phone ~
Jstewy21
April 8th, 2017, 10:36 AM
Not.
joecar
April 8th, 2017, 11:36 AM
Ok, you have to ask Mast for the kPa x V offset table, they should have it
~ by phone ~
Jstewy21
April 8th, 2017, 11:55 AM
When I asked for the injector info the above info is the only info I was given. That and that they flow 46# at 58 psi. Is there any way to adjust or guess the values across the scale? Maybe I will need to be more specific about which information I am needing. As for the some other tables Min. Pulse, Short Pulse, Short Pulse Adder. Is there any other information that I need?
joecar
April 8th, 2017, 12:33 PM
IFR can be calculated/scaled across the MAP/VAC kPa range...
but offset ms cannot.
~ by phone ~
Jstewy21
April 8th, 2017, 01:12 PM
Ok, thanks Joe.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.