Injector Offset Help

[Jstewy21]

I have a set of Fast 46# injectors I installed last night. I am currently trying to adjust the tune for the new injectors and have an issue with the Offset table. I was given the following information from FAST.
Ms V
1.70 8
1.29 9
1.00 10
0.78 11
0.63 12
0.50 13
0.41 14
0.19 16

How can I create a table with the given info across the KPA scale? Thanks for any help.

[joecar]

Is your FPR MAP-referenced or not...?

~ by phone ~

[Jstewy21]

Not.

[joecar]

Ok, you have to ask Mast for the kPa x V offset table, they should have it

~ by phone ~

[Jstewy21]

When I asked for the injector info the above info is the only info I was given. That and that they flow 46# at 58 psi. Is there any way to adjust or guess the values across the scale? Maybe I will need to be more specific about which information I am needing. As for the some other tables Min. Pulse, Short Pulse, Short Pulse Adder. Is there any other information that I need?

[joecar]

IFR can be calculated/scaled across the MAP/VAC kPa range...

but offset ms cannot.




~ by phone ~

[Jstewy21]

Ok, thanks Joe.