Fueltech Ft600 coil wiring questions

[Powellbr]

Hi all, so I need some info. I'm going to be building a 509 cubic inch supercharged Big Block Chevy with coil on plug ignition and multiport fuel injection. I'm going to be starting with a Blueprint Engines long block and equipping it with a combo Whipple blower intake manifold and one of their 510R superchargers, fuel system is going to hopefully be completely alcohol compatible but definitely e85 compatible and the controller is gong to be a Fueltech Ft600 unit. I more or less understand how to wire the injectors but I don't know how to do the coil packs. I'm going to be using either LS2 or LS3 coils and was wondering if anyone knows how to wire the coils. I was also thinking of possibly using universal coils for the project but the problem I see with that is I wouldn't have any room in the engine bay for eight universal HEI coils. Anyway, thanks in advance.

Sent from my LGL52VL using Tapatalk

[joecar]

Doesn't the Fueltech have ignition coil drivers...?

[Tre-Cool]

These should help.

http://www.haltech.com/wp-content/uploads/2011/01/LS1-COIL-CONNECTOR.pdf

http://forums.haltech.com/viewtopic.php?t=9427

http://forums.haltech.com/viewtopic.php?t=13241

[Powellbr]

Yeah, I figured out the wiring not too long after I actually created this thread. But now idk if I'll need a cam synch sensor with me using a crank reluctor wheel with missing teeth and multiple coils or not... I emailed Fueltech earlier today and I'm waiting to hear back. And yes, the FT600 does have coil drivers.

Sent from my LGL52VL using Tapatalk