View Full Version : E38 High Injector Duty Cycle and High Map
nchristian
May 24th, 2017, 01:18 AM
21096 I was checking to see if I'm Logging the correct PIDs for Injector Duty Cycle Correctly. Its getting up to 237%. Also my Map is running about 80kpa cruising at 75mph. 2010 Silverado 6.2 285-45 r22 Tires on it.
Thanks
Nick
joecar
May 24th, 2017, 05:09 AM
You're using the pids GM.IBPW1/2 and CALC.INJ1/2DC, these are for GenIII.
You want the pids GM.INJPWB1/2...
for the INJDC pids you need to define calc pids for them as follows:
*CLC-00-011
% 0.0 100.0 .1 "{GM.INJPWB1}*{SAE.RPM}/1200"
*CLC-00-012
% 0.0 100.0 .1 "{GM.INJPWB2}*{SAE.RPM}/1200"
CALC.INJDCB1 F011 CLC-00-011 % Tuning "Injector Duty Cycle Bank 1"
CALC.INJDCB2 F012 CLC-00-012 % Tuning "Injector Duty Cycle Bank 2"
see attached calc_pids.txt.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.