calc_pids problem

[h41ry]

does anyone have a calc-pids file or the data for a techedge 2j9 serial wideband i have tried myself and failed and i dont have anyway to check that data entered is right

[joecar]

post your calc_pids.txt here.

[joecar]

Are you using a null modem adapter (it must say "null modem" on it)...?

[h41ry]

no i am using a ethernet cable that i made connecting the ethernet socket on the 2j9 and the data socket on the flash scan the cable seems to work fine. i think the problem is with the calc_pids file as i recently put the car on the dyno and the mixtures were off especially at wot i tuned for 12.9 and they on the dyno it showed high 10s

21106

[joecar]

Let me look (sorry I've been out all day)...

~ posted by phone ~

[joecar]

Ok, you fabbed up a null modem serial cable.

Does the 2J9's lambda/afr show up on the V2's LCD...?

~ posted by phone ~

[h41ry]

Ok, you fabbed up a null modem serial cable.

Does the 2J9's lambda/afr show up on the V2's LCD...?

~ posted by phone ~


Yes

[joecar]

Ok, your calc_pids.txt has a few errors and is attempting yo use the analog wideband connection.



Use this calc_pids.txt (https://forum.efilive.com/attachment.php?attachmentid=14575&d=1360953394) from the Calc.VET thread... look at the pid CALC.WO2BEN and how it is defined.

[h41ry]

Thanks joecar to be honest I don't really understand the file but would this calc_pids work as is for what I am trying to do

[joecar]

Is this your intent: to use your TechEdge 2J9 to tune the VE and/or MAF tables on your LS1/Gen3...

if so, then copy the calc_pids.txt (https://forum.efilive.com/attachment.php?attachmentid=14575&d=1360953394) I linked in post #8 to the folder C:\users\<you>\Documents\EFILive\V7.5\User Configuration


then select and log the following pids:
- GM.EQIVRATIO
- EXT.WO2xxx1 (i.e. WO2LAM1, WO2EQR1, WO2AFR1, WO2ST1)
- CALC.WO2BEN

the BEN correction pid you will use to correct VE/MAF tables is CALC.WO2BEN.

[h41ry]

yes i want to tune the ve table using the 2j9.
thanks mate