oreobadr
June 1st, 2017, 11:29 PM
Hey guys,
So I threw some headers onto my 2002 corvette and I noticed that my passenger side O2 sensor(stock narrowband) is hitting the frame. I also noticed that if I used an extension harness that I could move this stock O2 sensor to the wideband port which is where the two banks come together in the x pipe. Is this ok to do (Will I run into issues with it running weird) or should I just chalk up 200 bucks for some 3/8" drop engine mounts?
Besides the full exhaust, the car is completely stock so the stock tune really shouldnt be too far off.
Thanks!
So I threw some headers onto my 2002 corvette and I noticed that my passenger side O2 sensor(stock narrowband) is hitting the frame. I also noticed that if I used an extension harness that I could move this stock O2 sensor to the wideband port which is where the two banks come together in the x pipe. Is this ok to do (Will I run into issues with it running weird) or should I just chalk up 200 bucks for some 3/8" drop engine mounts?
Besides the full exhaust, the car is completely stock so the stock tune really shouldnt be too far off.
Thanks!