What maps to build BIG CAM

[killaz]

Hey guys. What maps should i build and monitor. Installed the MS3 cam on my 00 c5 M6. Headers, catback, pully, ls6 intake, cam ect ect. I have KR vs RPM map so far. What else should i check out. What other maps should i build? THX

AB

[Black02SS]

Honestly it is up to you. It shouldn't depend on the cam as to what maps you are using. This is what I run.

VE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT


There are others but that gives you an idea.

[vetteboy2k]

I think we should have a "MAP" Section Under Scanning in the Forums. This way users can post there .map files to share with other users. Really helps clear things up for new users.

[caver]

VE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT


I do the above and
Spark scaler
CMD AFR
Actual AFR
KR
Oh and working on moon phasing :)