PDA

View Full Version : What maps to build BIG CAM



killaz
June 13th, 2006, 12:24 PM
Hey guys. What maps should i build and monitor. Installed the MS3 cam on my 00 c5 M6. Headers, catback, pully, ls6 intake, cam ect ect. I have KR vs RPM map so far. What else should i check out. What other maps should i build? THX

AB

Black02SS
June 13th, 2006, 01:45 PM
Honestly it is up to you. It shouldn't depend on the cam as to what maps you are using. This is what I run.

VE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT


There are others but that gives you an idea.

vetteboy2k
June 14th, 2006, 01:30 AM
I think we should have a "MAP" Section Under Scanning in the Forums. This way users can post there .map files to share with other users. Really helps clear things up for new users.

caver
June 14th, 2006, 05:18 AM
VE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT


I do the above and
Spark scaler
CMD AFR
Actual AFR
KR
Oh and working on moon phasing :)