PDA

View Full Version : Support for Cummins CM2150 controller?



Bamfm7
June 29th, 2017, 02:51 AM
Just wondering if there is any plans to support the CM2150 controller. I believe this would cover 2008-2010 HD cummins/off road.

Thanks!

GMPX
June 29th, 2017, 07:16 AM
Yes, it would have been supported in the initial release but the checksum methods Cummins used are inconsistent between the numerous reads we have from this ECM. So we decided to hold it off until we can come up with a way to process them all accurately depending on the method each ECM OS uses.

Roostre
July 5th, 2017, 04:18 AM
Awesome news.

I've been on the brink of rewiring to use a different ECM, but it looks like with a little patience the CM2150 will be OK.

Thank you.

Roostre
December 7th, 2017, 01:31 AM
Any news on this?

GMPX
December 7th, 2017, 07:54 AM
CM2150 will not be supported on the first release, maybe early next year instead. We did enable reading for them so we could get some files but that is it.
The problem is there is three CM2150 versions, CM2150C, CM2150D and CM2150E. The 'E' is very different to the other two, unfortunately by the time we got to the point of making the software stable and not adding in anything else the CM2150's weren't ready to be added.

Orange Stroker
December 22nd, 2017, 07:15 AM
CM2150 will not be supported on the first release, maybe early next year instead. We did enable reading for them so we could get some files but that is it.
The problem is there is three CM2150 versions, CM2150C, CM2150D and CM2150E. The 'E' is very different to the other two, unfortunately by the time we got to the point of making the software stable and not adding in anything else the CM2150's weren't ready to be added.


I have one of these and have the Binary from it would that help at all? also when do you think flashing and editing will be ready once checksums are corrected because that is my current issue as well??

Thanks

GMPX
December 26th, 2017, 02:36 PM
Thanks, the reading and flashing was ok. As I said the issue was the differences in file structures and checksums between the CM2150C/D and the CM2150E.

House
December 27th, 2017, 04:20 PM
In to follow... first truck i get has to be a 2150!!! read was sent to support!

GMPX
December 28th, 2017, 08:39 AM
Thanks Joe, apologies for the current unsupported status though.

Dom_c13b
February 2nd, 2018, 03:29 AM
Any update on the 2150's? I've also got a couple of them that are ready to be done.
Thanks for the help!

cindy@efilive
February 2nd, 2018, 08:30 AM
CM2150 hasn't progrressed. At this stage we are waiting on a larger number of reads to be submitted so that we can cover a wider variety of file structures in a single development task. We don't want to be reworking a soultion based on additional file structures being submitted post-release.

Cheers
Cindy

Orange Stroker
February 8th, 2018, 03:40 AM
If I had funds for a HD v2 I'd have for sure another read for you if not 2 reads within a few weeks.

Dom_c13b
February 8th, 2018, 12:59 PM
Would some converted Bin work for you? I could get you a lot of them if that's all you'd want.

GMPX
February 8th, 2018, 01:57 PM
Thanks for the offer Dom but we would prefer actual reads. As it stands we have a pretty good collection to make a decision now.

House
May 2nd, 2018, 12:26 PM
any new updates?

GMPX
May 2nd, 2018, 01:21 PM
Should have some solid news with a possible release mid this month.

Orange Stroker
June 25th, 2018, 01:15 AM
Almost 2 months later. Any update on this?

cindy@efilive
June 25th, 2018, 07:49 AM
It's done and built into the software. The next release has a number of significant changes that require thorough testing prior to release. Once that testing wraps up CM2150 will be released.

Cheers
Cindy

Dom_c13b
June 26th, 2018, 12:28 PM
Awesome! Thank you

cindy@efilive
July 7th, 2018, 09:36 AM
Support was released on Friday

Roostre
August 30th, 2018, 11:45 AM
Support was released on Friday


:thankyou2: