PDA

View Full Version : 2016 LML Post injection disable



DieselAdam
July 12th, 2017, 09:49 AM
Hi,

I recently tried turning the enable calibrations for DPF, SCR, and Exhaust temperature control off. After I shut these features off, I noticed that the post injection is still on, but system is staying in normal mode (injection timing is not going really negative to heat up the after treatment system). I followed some of the different threads, the reference to the {B1021} calibration for injections that are on/off is no longer there in the current calibration set (at least from what I can find). Can anyone provide some insight on this? Thanks!

Snipesy
July 12th, 2017, 02:29 PM
The LML doesn't really use post injection for temperature control. You're fine keeping it as is.

If you want you can find those tables and tinker but... I doubt it's worth your time.

DieselAdam
July 13th, 2017, 11:34 AM
Okay, thanks.