E38 (06 Ls2) Bench Harness Diagram-help?!

[Chuck CoW]

Hey guys....I'm hurting for a bench diagram for the new E-38....I got a bunch of mail order pcm's to tune...I already have a GM PCM connector for the PCM....

But, I really need a pinout! HELP!

Hey Paul and Ross!!!:wave: HELP!

Chuck CoW

[GMPX]

All the following are on the Black plug
GND is the big pin (73 I think).
Battery is Pin 20
IGN is Pins 19&18
CAN - is Pin 27
CAN + is Pin 28

Cheers,
Ross

[Chuck CoW]

All the following are on the Black plug
GND is the big pin (73 I think).
Battery is Pin 20
IGN is Pins 19&18
CAN - is Pin 27
CAN + is Pin 28

Cheers,
Ross

Ross....THANKS A MILLION.....but, what does the dashboard connector pin out to when the vehicle is CAN? or what pins to use in the can/obd2 connector??? in 06????

IS 05 and 06 the same?....I have an 05 bench harness.....

LAST QUESTION....What about programming the TCM on an 06 A6 corvette???

Will I have to update my bench harness, or will the TCM need to be romoved from the trans and shipped along with the pcm for bench tuning of 06 C6 A6 corvettes in the future?????

THANKS FOR HELPIN ME OUT!! YOU GUYS RULE!:master:

CHUCK COW