E67 O2 Sensor timing

[Turbo6.0L]

Hello -
Been fighting with a low RPM surge\buck while driving on 2010 ZR1 that only has headers. Car is running well in open loop tuning for MAF but as soon as we go back into closed loop the surging\bucking starts back up again.

Since the O2 sensors Have been moved further down stream is there a way to slow down the closed loop response like on older ECM's?

[Highlander]

What operating system?

[Turbo6.0L]

OS number is 12635947



What operating system?

[Highlander]

Can you post the file?

[Turbo6.0L]

Can you post the file?

21700

[Highlander]

[B9544]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = STFT Base Delay VS Airflow Mode

;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- -------------------------------- ---------------- ---------------- --- --- -- ---
VIEW = 2 "STFT Base Delay VS Airflow Mode" "Fuel" "O2 Trims" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = 1DFEC8 0 16 SNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; -------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = ms 0.125 0 0 0 3000 0 3000
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- -------------------------------------------------------------------
SI_COL = "Delay" "ms"
IM_COL =
SI_ROW = AirFlowMode "0,8,16,24,32,40,48,56,64"
IM_COL =
; ================================================== =============================

[B9545]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = STFT Proportional Gain Vs mV

;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- -------------------------------- ---------------- ---------------- --- --- -- ---
VIEW = 2 "STFT Proportional Gain Vs mV" "Fuel" "O2 Trims" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = 1DFEA4 0 16 SNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; -------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = ms 0.000030517 0 3 0 2 0 2
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- -------------------------------------------------------------------
SI_COL = .
IM_COL =
SI_ROW = O2Error "0.0,0.5,1.0,1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6. 0,6.5,7.0,7.5,8.0"
IM_COL =
; ================================================== =============================


[B9546]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = STFT Proportional max vs airflow mode

;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- -------------------------------- ---------------- ---------------- --- --- -- ---
VIEW = 2 "STFT Proportional Max vs airflow mode" "Fuel" "O2 Trims" 1 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = 1DFE60 0 16 UNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; -------- -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = Factor 0.000030517 0 3 0 2 0 2
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- -------------------------------------------------------------------
SI_COL = "Delay" "ms"
IM_COL =
SI_ROW = AirFlowMode "0,8,16,24,32,40,48,56,64"
IM_COL =
; ================================================== =============================