PDA

View Full Version : Public Release (Updated Oct 31, 2017)



Blacky
October 30th, 2017, 04:15 PM
An error has been detected in this software. Links and Check for Updates patches have been removed. October 20, 2017 public release software has been reactivated.

If you have updated to this public release, please revert to the previous public release, which can be found here https://forum.efilive.com/showthread.php?28050-Current-Public-Release-(Oct-2017)


Release Notes:
Whats New (http://download.efilive.com/Software/whatsnew_8_2_9.htm)


Version Numbers:
After installing the Oct 2017 Public Release Release you should have the following software, boot block, firmware versions installed:



[*=1]EFILive V7 software: V7.5.14 To view the installed version, select Help->About (in the V7 Scan or Tune software).
[*=1]EFILive V8 software: V8.2.9 To view the installed version, select Help->About (in the V8 Scan and Tune software).
[*=1]Boot Block: V2.07.007 (Feb 07, 2014) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
[*=1] Firmware: V2.07.127 (Oct 25, 2017) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


Download here:
LINKS REMOVED


If you have the previous October 2017 public release version installed (V7.5.13 and/or V8.2.8), you may use the "Check For Updates" start menu option for V7.5 and V8 to update the software automatically - requires an Internet connection.


Known Issues:
Issue #1:
If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.

Workaround:
None.
It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.


Issue #2:
When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
Workaround:
EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.


-

wesam
October 30th, 2017, 05:36 PM
Thanks Paul
I will check MAP scaler

MobileProg
October 31st, 2017, 03:37 AM
Updating one calibration with alternate values from another cal.

21654

GMPX
October 31st, 2017, 08:18 AM
Just to let everyone know Paul is away until Monday so any issues won't be addressed until he is back.

cindy@efilive
October 31st, 2017, 09:57 AM
An error has been detected in this software. Links and Check for Updates patches have been removed. October 20, 2017 public release software has been reactivated.

If you have updated to this public release, please revert to the previous public release, which can be found here https://forum.efilive.com/showthread.php?28050-Current-Public-Release-(Oct-2017)

Cheers
Cindy

Road
October 31st, 2017, 11:38 PM
An error has been detected in this software. Links and Check for Updates patches have been removed. October 20, 2017 public release software has been reactivated.

If you have updated to this public release, please revert to the previous public release, which can be found here https://forum.efilive.com/showthread.php?28050-Current-Public-Release-(Oct-2017)

Cheers
Cindy

I had a couple of CM2200 flashes that left me scratching my head. This error have anything to do with CM2200?

cindy@efilive
November 1st, 2017, 08:30 AM
I had a couple of CM2200 flashes that left me scratching my head. This error have anything to do with CM2200?

Not that I'm aware of. The issue that we pulled the release for was file sizes in V7 - all files saved were 2KB and unusable. Should be fixed when Paul returns tonight.

Cheers
Cindy


Sent from my iPad using Tapatalk