2015.5 GM 8l90e T87 controller R&D help

[Dr. Oldsmobile]

Is there anyone that understands the 2015.5 - T87 transmission TCU code enough to do the inevitable and run the 8l90e standalone behind non chevy -B.O.P. ENGINES with a controller like tci or know of aftermarket efi ecu that will work in conjunction with t87? Holley has a efi ecu that runs a old trans

Please no discussion on ancent 4l80e trans based on even more ancient th400. The cost and effort of 4l80e to only gain overdrive is not logical. 6l90 is a light duty trans. My Olds will dictate a heavy duty auto and the 8l is that trans.

Thank you for any help

[joecar]

Hi Dr.Olds,

welcome to the forum :cheers:

what torque does your engine make, and how high does it spin...?

Hopefully someone will know the answer.

[Dr. Oldsmobile]

Hi Dr.Olds,

welcome to the forum :cheers:

what torque does your engine make, and how high does it spin...?

Hopefully someone will know the answer.


Hello. Thanks for reply.

Engine spins to 5500 rpm. Oldsmobile is very torque orientated. Not high winding. Great for street duty.

MONDELLO/Olds 361 - 420hp/450lbs tq. - ( boost comming soon)
350 race prepped crank
403 cryo treated rods / ARP
4.125 - 425 pistons - 98 over bore - true 9.5 compression
#6 - 1969 nos heads ported by Joe
350 block decked - 100 thou
Edlebrock performer duel plane milled 100 thou , fully ported by myself.
Jack engle cam - .512 lift
Msd - 6al
Truely balanced and blueprint to under 3 thou variance��.
Every trick Joe has was put into this engine.