E92 Tables request

[wesam]

Hello EFI team there is one table needed for E92 Cal 12683365 B520A & B520B
Also there is a desired coolant temperature table that need to be added for all E92 OS cars with 160 thermostat that will change the desired coolant temperature to some thing lower than 90C
And finally the PRatio tables which is the Maximum Pressure Ratio when the calculated engine torque is invalid such as MAF, MAP or other fault required for engine torque calculation

Thanks in advance

[GMPX]

I'll pass it on but some of the staff are away for most of the month on summer holidays.
B520A & B520B doesn't sound correct, can you please recheck what numbers you meant.
Cheers.

[wesam]

I'll pass it on but some of the staff are away for most of the month on summer holidays.
B520A & B520B doesn't sound correct, can you please recheck what numbers you meant.
Cheers.

Sorry the labels are B5220 and B5221

[Chuck CoW]

Hello EFI team there is one table needed for E92 Cal 12683365 B520A & B520B
Also there is a desired coolant temperature table that need to be added for all E92 OS cars with 160 thermostat that will change the desired coolant temperature to some thing lower than 90C
And finally the PRatio tables which is the Maximum Pressure Ratio when the calculated engine torque is invalid such as MAF, MAP or other fault required for engine torque calculation

Thanks in advance

YES.... I'll second that. E92 has a good few cooling fan tables we could use and in addition, these engines are becoming popular with engine swap customers

so some of the "other" fan tables would certainly be of help if they are going to look into any of them.

Thank you.
Chuck CoW

[GMPX]

Feb at the earliest with staff still away on summer holiday.

[Chuck CoW]

Feb at the earliest with staff still away on summer holiday.


No sweat.... It will be shitty and cold here for another month or so.

Thanks for looking into it!
Chuck CoW

[wesam]

I hope those tables will be added in next release
I Looked in the latest Beta and still not thing added

Thanks

[GMPX]

I'm not sure where it is all at, I'd have to follow it up but if they are not in the beta then they are probably not close.

[wesam]

Please check and let me know
Thanks

[wesam]

Any updates about this ?

[cindy@efilive]

The developer and I are catching up next week to discuss.

Cheers
Cindy

[wesam]

I hope those tables will be added to 18 trucks OS 12683365 also

[cindy@efilive]

Pressure ratio limit and desired coolant temp have been added. B5221 was already defined in this OS. The developer could not find B5220.

Attached is the updated calz file for 12683365 as listed in post #1. We expect that these enhancements will be added to other operating systems later this week. The timing on that will determine if they are included in the next release - I suspect given the current stage of testing that the release may occur before the rest of the OS's are updated.

Cheers
Cindy

[cindy@efilive]

The next EFILive software release will contain updates to 37 E92 operating systems for desired eng temp, Fan control, Max boost pressure and max pressure ratio tables.

Cheers
Cindy

[ScarabEpic22]

The next EFILive software release will contain updates to 37 E92 operating systems for desired eng temp, Fan control, Max boost pressure and max pressure ratio tables.

Cheers
Cindy

Great to hear!

[wesam]

THanks Cindy But I hope if B5220 will be added for OS 12677878 if he could not find it in OS 12683365

[cindy@efilive]

THanks Cindy But I hope if B5220 will be added for OS 12677878 if he could not find it in OS 12683365

It appears that B5220 is not managed the same way it was from the factory. The developer was unable to find it. If you know the address of the table he can revisit it for you.

Cheers
Cindy

[Highlander]

What is b5220?