Injector data needed - siemens deka 60lb

[GR8GAME]

I've done some searching and really haven't found some good baseline information on these injectors.
I was hoping someone could post up some known "good" data for these injectors for a Corvette - LS1B Ecu.

Thank you,
John

21799

[statesman]

I'm not a fan of these injectors. I've seen bank to bank trim imbalances of 10% with some of these injector sets. Deadtime is usually between 0.7ms and 0.8ms @ 14v. Flow rate really depends on the set you're working with. Good luck.

[GR8GAME]

I'm not a fan of these injectors. I've seen bank to bank trim imbalances of 10% with some of these injector sets. Deadtime is usually between 0.7ms and 0.8ms @ 14v. Flow rate really depends on the set you're working with. Good luck.

I've been looking and searching both on this forum and on the "other" forum. I'm seeing the same thing!
I contacted FIC and they suggested the same injectors I always prefer - the green Bosch that use stock data!
Sometimes it's not worth arguing with people who think the Internet is always right...