Burnett03
January 29th, 2018, 02:06 PM
I followed the instructions to log FPR through my egr on my LS1B (05 silverado) I have adjusted the calc.pids as shown in the tutorial. I just save the file back in the same folder with the same name correct? Does it look right? Thanks for your time.
# ================================================== ============================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
PSI Imperial PSI "Pounds Per Square Inch"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001
PSI 0.00 100.00 .2 "({GM.EGRS}*25)-12.5"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System
# ================================================== ============================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
PSI Imperial PSI "Pounds Per Square Inch"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001
PSI 0.00 100.00 .2 "({GM.EGRS}*25)-12.5"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System