PDA

View Full Version : Laptop not reconizing AutoCal



pm8546
March 3rd, 2018, 06:09 PM
Have not had my AutoCal hooked to my laptop for a while and tonight when I plugged it in and started the software it kept prompting me to connect my AutoCal. None of the software will recognize that it is connected.

Any help would be appreciated, Thanks

joecar
March 4th, 2018, 07:17 AM
Does your AutoCal display light up...?

pm8546
March 4th, 2018, 07:21 AM
Does your AutoCal display light up...?

Yes it does, just like when I plug it in to my truck. "Display DTCS"

joecar
March 4th, 2018, 06:07 PM
So when you run V8 software it does not see your AC...?

pm8546
March 4th, 2018, 07:36 PM
No it dose not, it says to plug it in and says that other software may be using the AutoCal.

joecar
March 5th, 2018, 04:56 AM
Go Start->All Programs->EFILive->V8->EFILive V8 USB Manager
and click Show Old Drivers... try each of the drivers.



Also: does your USB port has xHCI configured...?
see here: Please-Read-Windows-8-Users-(USB3-xHCI) (https://forum.efilive.com/showthread.php?23223-Please-Read-Windows-8-Users-(USB3-xHCI))

pm8546
March 5th, 2018, 05:04 AM
Why would this work just fine 7 to 8 months ago and now my laptop dose not recognize my AutoCal? I have looked for my USB manager and can not find it, I am running WIN 10 if that makes any difference. I really appreciate your help with this....

joecar
March 5th, 2018, 05:11 AM
Windows may have updated the FTDI driver.


You will find the USB manager in this folder: C:\Program Files (x86)\EFILive\V8

pm8546
March 5th, 2018, 05:26 AM
I have looked their and my V8 folder is empty, I may have down loaded the software to another drive on my laptop.

pm8546
March 5th, 2018, 05:35 AM
I have looked every where on all drives under EFiLive V8 and can not find the USB manager. Can I uninstall and reinstall the new software?

joecar
March 5th, 2018, 07:44 AM
Un-install, and then reinstall to default folder (C:\Program Files (x86)).

pm8546
March 5th, 2018, 08:21 AM
ok I will try that with my fingers crossed, Will I be ok installing the up-to-date (current version) software?

joecar
March 5th, 2018, 09:31 AM
This is the current released (non-beta) software: Current-Public-Release-2-(Dec-2017) (https://forum.efilive.com/showthread.php?28154-Current-Public-Release-2-(Dec-2017))

pm8546
March 5th, 2018, 09:53 AM
Thank You

pm8546
March 11th, 2018, 02:47 PM
Thanks joecar it worked, I updated the software and now my AutoCal is recognized by my laptop. Now if I and Idaho Rob could just figure what's going on with my DSP5 switch and tune things would be really good....

joecar
March 12th, 2018, 03:40 AM
Glad you got it going.