PDA

View Full Version : $0534



Road
May 25th, 2018, 10:16 AM
I have summit-ed a support ticket also. I have a CM2200 that failed the patch file write and now is setting a $0534 invalid serial number and ecm is dead in the water. Trace files attached.22104

cindy@efilive
May 26th, 2018, 08:22 AM
The controller should be recoverable by flashing a tune file without any security permissions. You should follow the steps outlined here. https://support.efilive.com/kb_article.php?ref=7233-PHJN-8346

Cheers
Cindy


Sent from my iPad using Tapatalk

Road
May 26th, 2018, 09:27 AM
The controller should be recoverable by flashing a tune file without any security permissions. You should follow the steps outlined here. https://support.efilive.com/kb_article.php?ref=7233-PHJN-8346

Cheers
Cindy


Sent from my iPad using Tapatalk

I am flashing with out restrictions. Using my V2 direct flashing. Efi wont flash it because it wont detect a serial number assuming for licensing reasons.

GMPX
May 27th, 2018, 09:41 AM
Mike unfortunately it was Sunday here when that support request came through, anyway the response in the trace file at the end is error $0340, download not accepted (meaning the anti-tuning security is still active).
Because that flash has not been successful the ECM will be in boot mode, if you can please update to the latest software version that would be helpful as we have done some updates to bootmode recovery in that version.
https://forum.efilive.com/showthread.php?28413-Current-Public-Release-(May-2018)

Road
May 28th, 2018, 12:55 AM
Mike unfortunately it was Sunday here when that support request came through, anyway the response in the trace file at the end is error $0340, download not accepted (meaning the anti-tuning security is still active).
Because that flash has not been successful the ECM will be in boot mode, if you can please update to the latest software version that would be helpful as we have done some updates to bootmode recovery in that version.
https://forum.efilive.com/showthread.php?28413-Current-Public-Release-(May-2018)

I was using latest beta software and should have posted in the beta thread. Back on Public release till further notice. Thank you

cindy@efilive
May 28th, 2018, 09:10 AM
The beta was superseded by the public release, you will be upgrading not downgrading by using the May Public Release