Can't validate RAFNG pid

[1bar]

I have done everything in the tutorial to validate a pid. Is there something I am missing?

Thanks,
Glenn

[purrvert]

Right click the pid for more information, something else needs to be selected to work.

[Doc]

What OS are you runing?

[1bar]

I am running OS 3. I was wondering if there was something else that needed to be monitored to use this pid. I will check and get back with you.

Glenn

[ringram]

yes ltit and stit that match the pid. Look at its properties, it should tell you what you need.

[johnv]

Can we still log RAFIG etc without the MAF ?
I'm running SD, can get all pids validated etc , but map won't show any data when I log.

Had worked for me when I tried a while back with the MAF.:bash:

[1bar]

Okay, got the supporting pids activated, but I made a map from another post in here. I used the RAFNP as the main page and then used ECT for the rows and columns. All I get is one square in the bottom right corner counting up from 1:nixweiss:

Glenn

[purrvert]

Need to log from cold startup till fully warm and have ECT selected.

LABELS RAFPN Grams/s RAFPN (Cell Count)
ECT In_Gear Park/Neutral
-40
-28
-16
-4
8
20
32
44
56
68
80
92
104
116
128
140

[1bar]

This is what I have, do I only need ECT in the rows and forget about the columns?

[purrvert]

Whatever table you are trying to adjust in tuning needs to be fully represented in the scan tool. I normally copy from tuning to scan. Mind the units so you don't adust grams by pounds etc.

The example I gave earlier was for RAFPN, sorry if that was misleading.