View Full Version : V2 Goes Blank When I Load A SD Card
Mr teabags
August 14th, 2018, 01:33 PM
Hi , Im following the tutorial on installing a SD card but the V2 Unit Looses power On lcd screen and I loose
communication . If I remove the sd card it will power back up . SD card im using is 16gb verbatim
Mr teabags
August 14th, 2018, 09:02 PM
All sorted , the sd card I purchased was not compatible, replaced all good
joecar
August 15th, 2018, 05:25 AM
Thanks for posting.
Burrill
August 22nd, 2018, 11:00 PM
Just out of curiosity, what was the SD card that's compatible btw? I plan on buying a new SD card as well.
joecar
August 23rd, 2018, 04:30 AM
I don't know what SD card Mr teabags used.
( I know SanDisk is ok )
cindy@efilive
August 23rd, 2018, 10:13 AM
Supported SD Card formats, and SD card configuration instructions are documented here.
https://support.efilive.com/kb_article.php?ref=6425-AKLC-5907
Cheers
Cindy
Mr teabags
August 23rd, 2018, 07:25 PM
Sorry guys the sandisk 16gb memory card works well
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.