OBDII J1996/M conneted to Ethernet (RJ45) pinout

[Justrollen]

We own several OBD2 Scanners that attach to DB9,s.

A project we are doing requires us to pinout 2 OdbII (j1962/male) connectors to ethernet (RJ45).

I am trying to pinout the Obd2 to ethernet with no luck

anyone that can kindly assist us with the pinout for that?
Below is how we connected a DB9. ( FYI )

22375

Respectfully,
Michael Joy
Systems Engineer

856-879-4027

[GMPX]

For the EFILive cable you can get the details in this document:
http://download.efilive.com/Tutorials/PDF/Bench%20Harness%20Tutorial.pdf

[modz2015]

this doesn't tell you what wires from the rj45 connect to the obd2 im in Australia and looking at that link tells me nothing

[GMPX]

It tells you everything you need to know, to save you the trouble here it is.

V2 RJ-45
1 - 12V
2 - CAN + (H)
3 - CAN - (L)
4 - GND
6 - VPW
8 - GND

OBDII plug
2 - VPW
4 - GND
5 - GND
6 - CAN - (L)
14 - CAN + (H)
16 - 12V

But if you are just going from RJ45 to OBD-II then why not use the supplied cable?