PDA

View Full Version : Possible Bug


Road
October 1st, 2018, 11:56 PM
Somewhere along the way I started getting this error on the LLY's and running scripts give same error types. 8.2.19 version
GMPX
October 2nd, 2018, 10:23 AM
Hi Mike, what version of V7 are you running there? That was a bug in one of the previous betas.
Road
October 2nd, 2018, 12:22 PM
Hi Mike, what version of V7 are you running there? That was a bug in one of the previous betas.

7.5.23
GMPX
October 2nd, 2018, 02:04 PM
From the current release notes:

Build V7.5.24 Bug FIxes:


When displaying a user defined cax definition, if the data scaling offset is non zero (and greater than 1.5) then the message: "Axis Maximum Value must be >= Minimum." may be displayed and the cax definition will not load correctly.


It may be related to what you are seeing there, would be worth updating just to see.
http://www.efilive.com/latest/september-2018-public-release/

Cheers,
Ross
Road
October 2nd, 2018, 02:15 PM
From the current release notes:

Build V7.5.24 Bug FIxes:


When displaying a user defined cax definition, if the data scaling offset is non zero (and greater than 1.5) then the message: "Axis Maximum Value must be >= Minimum." may be displayed and the cax definition will not load correctly.


It may be related to what you are seeing there, would be worth updating just to see.
http://www.efilive.com/latest/september-2018-public-release/

Cheers,
Ross

That version works. Guess I missed that release.

Thanks