PDA

View Full Version : Lly - monitors not supported?


GR8GAME
October 13th, 2018, 07:40 AM
Sorry, I'm not familiar at all with Diesel tuning.
But I have a customer with a Autocal running an aftermarket tune in his truck.
He flashed it back to stock! But the Monitors all show as "Unsupported".

Back Story, he is trying to get the truck to pass smog. He put all the stock parts back onto the truck. Here in CA you have to smog your truck every other year and he doesn't want to deal with the smog nazi's any longer.

Any help would be appreciated.
I did upload the stock file. I did not pull the modded file at all. I just wanted to make sure the Autocal put the ECU back to stock.

I also included a screen snap of the monitors.

2245922460
joecar
October 14th, 2018, 09:17 AM
Hmmm...
GMPX
October 14th, 2018, 09:20 AM
I'm not sure either, obviously some of those would not be supported on a Diesel though. Unless someone can hook up to a stock LLY and see what is supported for you it might actually just be like that, it's not saying they failed.
1FastBrick
October 14th, 2018, 06:38 PM
I'm not sure either, obviously some of those would not be supported on a Diesel though. Unless someone can hook up to a stock LLY and see what is supported for you it might actually just be like that, it's not saying they failed.

Ask and Ye shall receive... :grin:

Have to protect my personal vin but you can see its an 05 LLY.

I must ask the original poster,
Is the correct controller selected?
Key in the Key on position?
After flashing back to stock was the vehicle run and driven after the reflash?

22462
22463
GMPX
October 14th, 2018, 06:40 PM
Thanks for that, OP will appreciate the confirmation on what is correct.
1FastBrick
October 14th, 2018, 06:43 PM
Thanks for that, OP will appreciate the confirmation on what is correct.

Any time!
1FastBrick
October 14th, 2018, 07:03 PM
I reviewed the tune file and compared to mine.

The tables are set wrong in the "stock file" you posted.
GR8GAME
October 15th, 2018, 08:33 AM
Ask and Ye shall receive... :grin:

Have to protect my personal vin but you can see its an 05 LLY.

I must ask the original poster,
Is the correct controller selected?
Yes! I confirmed it in Ver 8 software.

Key in the Key on position?
Yes.

After flashing back to stock was the vehicle run and driven after the reflash?
Runs and drives just fine.


22462
22463

AWESOME
Ok, so now that I know which monitors it's looking for. I just need to figure out how to solve it.

Thank you for that.
I answered your questions above.
GR8GAME
October 15th, 2018, 08:35 AM
Thanks for that, OP will appreciate the confirmation on what is correct.

yes, very much so!
GR8GAME
October 15th, 2018, 08:35 AM
I reviewed the tune file and compared to mine.

The tables are set wrong in the "stock file" you posted.

I pulled that file from TUNE DEPOT.
Do you know what I need to change in it?
1FastBrick
October 15th, 2018, 09:11 AM
I pulled that file from TUNE DEPOT.
Do you know what I need to change in it?

As a matter of fact I do. Check your Pm box.

Is that the correct Vin of the truck you are working on Or is that just a factory tune you pulled from the repository?