PDA

View Full Version : LML OS issue


Cyrperformance
November 16th, 2018, 03:54 PM
Purchased stock file from PPEI and getting error in photo. I have emailed them yesterday early afternoon and again today with no reply. Owner of vehicle is understandably frustrated and turning to the forum for help.
Road
November 17th, 2018, 10:54 AM
Purchased stock file from PPEI and getting error in photo. I have emailed them yesterday early afternoon and again today with no reply. Owner of vehicle is understandably frustrated and turning to the forum for help.
E mail me your vin and I will send you a stock file. mike366882@hotmail.com
1FastBrick
November 17th, 2018, 11:14 AM
E mail me your vin and I will send you a stock file. mike366882@hotmail.com

Ironically the Vin is in the picture.

But it is very nice of you to be able to send him a stock file. That's what makes the community for this software so great. Thank You for offering that to him!
Road
November 17th, 2018, 11:23 AM
E mail me your vin and I will send you a stock file. mike366882@hotmail.com

Also do a full flash and the old 4094 file will flash
Cyrperformance
November 17th, 2018, 04:24 PM
Also do a full flash and the old 4094 file will flash

It gave the same error with full flash.
GMPX
November 18th, 2018, 08:55 AM
So just out of interest, the file in your vehicle is for a 2013, the file you are trying to flash is for a 2011. I can understand the error coming up if you tried to calibration flash that file but a full flash should have been possible because I don't think there is any restrictions on the E86A ECM as far as that goes.